C9300-48UXM-E-RF

Reference:

$4,176.16
Tax included
Ctlyst9300 48-prt(12mGig&36 2.5Gbps)NtwrkEntlsREMANUFACTURED
Quantity

Add to wishlist

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

C9300-48UXM-E Overview

C9300-48UXM-E is the Catalyst 9300 switch, providing 48-port 2.5G (12 mGig) UPOE, and Network Essentials. Cisco® Catalyst® 9300 Series Switches are Cisco’s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry’s most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco’s lead enterprise architecture. At 480 Gbps, they are the industry’s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.

Quick Spec

Table 1 shows the quick spec.
Model C9300-48UXM-E
Total 10/100/1000 or Multigigabit copper ports 36x 100 Mbps,1G, 2.5G + 12x Multigigabit (100M, 1G, 2.5G, 5G, or 10 Gbps)
Default AC power supply 1100W AC
Available PoE power 490W
Cisco StackWise-480 Yes
Cisco StackPower Yes
Switching capacity 580 Gbps
Stacking bandwidth 480 Gbps
Total number of MAC addresses 32,000
DRAM 8 GB
Flash 16 GB
Dimensions (H x W x D) Inches Chassis only: 1.73 x 17.5 x 19.1 W/ Default Power Supply: 1.73 x 17.5 x 22.2 W/ 1100W Power Supply: 1.73 x 17.5 x 22.2

The Options

Table 2 shows the recommended hardware.
Model Description
C9300-NM-4G 9300 Series 4x 1G Network Module
C9300-NM-4M 9300 Series 4 x Multigigabit Network Module
C9300-NM-8X 9300 Series 8x 10G Network Module
C9300-NM-2Q 9300 Series 2x 40G Network Module
C9300-NM-2Y 9300 Series 2x 25G Network Module
STACK-T1-50CM= 50CM Type 3 Stacking Cable
STACK-T1-1M= 1M Type 3 Stacking Cable
STACK-T1-3M= 3M Type 3 Stacking Cable
SSD-120G Cisco pluggable USB3.0 SSD storage

Compare to Similar Item

Table 3 shows the comparison.
Model C9300-48UXM-E C9300-24UX-E
Total 10/100/1000 or Multigigabit copper ports 36x 100 Mbps,1G, 2.5G + 12x Multigigabit (100M, 1G, 2.5G, 5G, or 10 Gbps) 24 Multigigabit Cisco UPOE (100M, 1G, 2.5G, 5G, or 10 Gbps)
Default AC power supply 1100W AC 1100W AC
Available PoE power 490W 560W
Cisco StackWise-480 Yes Yes
Cisco StackPower Yes Yes

Get More Information

Do you have any questions about the C9300-48UXM-E? Contact us now via Live Chat or sales@fabcomputers.com

C9300-48UXM-E Specification

C9300-48UXM-E Specification
General
Device Type Switch - 48 ports - L3 - managed - stackable
Enclosure Type Rack-mountable 1U
Subtype 2.5 Gigabit Ethernet
Ports 36 x 2.5GBase-T (UPOE) + 12 x 100/1000/2.5G/5G/10G (UPOE)
Power Over Ethernet (PoE) UPOE
PoE Budget 490 W
Performance Switching capacity: 580 Gbps ¦ Stacking bandwidth: 480 Gbps ¦ Forwarding rate: 431.54 Mpps
Capacity IPv4 routing table entries: 32000 ¦ IPv6 routing table entries: 16000 ¦ Flexible NetFlow entries: 64000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 2000
MAC Address Table Size 32000 entries
Jumbo Frame Support 9198 bytes
Routing Protocol OSPF, IS-IS, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng
Remote Management Protocol SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
Encryption Algorithm 128-bit AES
Features Trunking, full duplex mode, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, FTP client, 3 fans, Control plane protection (CoPP), Source-Specific Multicast (SSM), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Private VLAN
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at
RAM 8 GB
Flash Memory 16 GB
Status Indicators Status
Expansion / Connectivity
Interfaces 36 x 2.5Gbit LAN RJ-45 UPOE ¦ 12 x 1/2.5/5/10GBase-T UPOE ¦ 1 x USB 2.0
Expansion Slots 1 (total) / 1 (free) x expansion slot
Power
Power Device Internal power supply - hot-plug
Installed Qty 1 (installed) / 2 (max)
Power Redundancy Optional
Power Provided 1100 Watt
Voltage Required AC 120/230 V (50 - 60 Hz)
MTBF 202,160 hours
Compliant Standards CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, CAN/CSA C22.2 No. 60950-1, VCCI Class A, EN 300386, EN 55022 Class A, FCC CFR47 Part 15 A, TVCN 7317, VCCI V-3/2009 Class A
Dimensions
Width 17.5 in
Depth 18.5 in
Height 1.7 in
Miscellaneous
Service & Support Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days
Min Operating Temperature 23 °F
Max Operating Temperature 113 °F
Humidity Range Operating 5 - 90% (non-condensing)
Min Storage Temperature 158 °F
Max Storage Temperature 104 °F
Humidity Range Storage 5 - 90% (non-condensing)
10 Items

16 other products in the same category:

Product added to compare.